| Model |
IPX4202HD/IPX4602HD (RE 1.1) |
| ..[Camera] |
Image Sensor |
1/3” 1080p CMOS |
Effective Pixels |
1920 x 1080 |
Scanning System |
Progressive scanning |
AGC Control |
Auto or Fixed Manual Setting |
Auto IRIS (DC) |
Supported |
Accuracy
|
0.002° Dome System Accuracy |
Min. Illumination
|
Color: 1.5Lux(50 IRE) / 0.02Lux(Sens-up)
B/W : 0.1Lux(50 IRE) / 0.001Lux(Sens-up) |
Lens
|
4.45(w) – 89.0mm(t), F1.6(w) – F2.9(t), Optical 20x, Digital 8x |
Luminance S/N Ratio
|
More than 50dB |
Angle of View
|
Horizontal: Approx. 55.56°(Wide) to 3.10°(Tele)
Vertical: Approx.43.32°(Wide) to 2.34°(Tele) |
Shutter Time |
1/10,000s to 1/2s |
Day & Night |
True Day & Night (Removable IR-cut filter) |
Wide Dynamic Range |
Supported (60dB) ON/OFF |
| ..[Video] |
Video Compression |
H.264 Baseline, Main, High profile(MPEG-4 Part 10/ AVC),
MJPEG(Motion JPEG) |
Video Streaming
|
Dual Stream, Configurable streams in H.264, MJPEG
H.264: Controllable frame rate, bandwidth(VBR/CBR)
MJPEG: Controllable frame rate, JPEG quality |
Resolutions |
1920 x 1080, 1280 x 720, 1120 x 630, 960 x 540, 800 x 450,
640 x 360, 480 x 270, 320 x 180 |
Frame Rate |
H.264: Max 30fps in all resolution
MJPEG: Max 30fps in all resolution |
Image Settings |
Configurable brightness, contrast, saturation, sharpness |
Compression FPS |
30fps @1080HD |
Image Orientation |
Flip / Mirror |
Noise Filter |
Supported (0 ~ 3) |
Smart Bitrate Control |
Supported (It works in VBR mode) |
Exposure Adjustment |
+1.0, +0.6, +0.3, 0, -0.3, -0.6, -1.0 EV |
White Balance |
ATW / Indoor / Outdoor / Manual |
Back Light Compensation |
On(possible to designate zone) / Off |
Flicker Control |
Normal, 50Hz, 60Hz |
DSS (Sens-up) |
2X ~ 16X |
Video Stabilization |
- |
BLC |
On(possible to designate zone) / Off |
Burnt-in Text |
Time stamp and text caption overlay |
Privacy Zone |
8 configurable regions* |
Output |
BNC, NTSC / PAL |
| ..[Audio] |
Audio Streaming |
Two-way |
Audio Compression |
G.711-uLaw |
Audio input / output |
Supported |
| ..[Network] |
Ethernet Standard |
10 / 100 Base-T Ethernet with PoE, Unicast/Multicast |
Protocol |
QoS Layer 3 DiffServ, TCP/IP, UDP/IP, HTTP, HTTPS, RTSP, RTCP, RTP/UDP, RTP/TCP, mDNS, UPnP™, SMTP, DHCP, DNS, DDNS,
SNTP, SNMPv1/v2c/v3(MIB-II), IGMP, ICMP, SSLv2/v3, TLSv1, IPV4, IPV6, ARP IEEE802.1X, SSH |
Digital Input/Output |
Input – 4 Channel / Output – 2 Channel |
Security |
Multi-level access with password protection |
RS-485/422 |
Supported |
| ..[PTZ] |
Zoom Ratio |
Optical 20x; Digital 8x* |
On Screen Display |
Support: ID, Sequence, PTZ position, Time, Preset Name |
Manual Zoom Speed |
3.3 ~ 7.4 sec (1x to 20x) |
Privacy Mask |
Capable of Privacy Masks |
Preset Zoom Speed |
3.3 sec (1x to 20x) |
Pan / Tilt Range |
Pan Range: 360° Endless Rotation / Tilt Range: -5° ~ 185° / Auto-flip |
PTZ Operation |
High Speed, Smooth,
precise control of camera positioning and auto/manual focus |
Pattern |
8 Programmable Patterns |
Manual Pan/Tilt Speed |
0.05° ~ 112° /sec |
Auto Pan |
Programmable Auto Scan |
Preset Pan/Tilt Speed |
600°/sec |
Control |
255 preset points; 6 tours; Auto panning; Auto run, Pan/Tilt while zooming |
System Accuracy |
±0.1°(Preset point), 0.002°(Resolution) |
| ..[Integration] |
Application Programming Interface |
Software Development Kit(SDK) available / ONVIF Compliant (Profile S) |
Event Sources |
Video Motion Detection; Tamper Detection; Video Content Analytics(VCA); Network Setting Change; Sensor(DI) |
Event Actions |
File upload: E-mail, FTP
Notification: E-mail, FTP, HTTP, TCP
Trigger-Alarm(DO) |
Event Metadata Streaming (RTSP/RTP) |
Video Motion Detection(MD); Video Content Analytics(VCA) |
| ..[General] |
Material |
IPX4202HD(RE 1.1):Plastic (ABS); Ivory
IPX4602HD(RE 1.1): Aluminum, Anti-vandal bubble (PC); Ivory |
Edge Storage |
1x Alarm In, 1x Alarm Out |
Users |
Live viewing for up to 10 clients |
Power Source/ Consumption |
IPX4202HD(RE 1.1):AC 24V, PoE+(802.3at) / 18W @ AC 24V
IPX4602HD(RE 1.1): AC 24V, PoE+(802.3at) / 53W(heater on)@ AC 24V |
Operating conditions |
Humidity up to 85% RH (non-condensing)
IPX4202HD(RE 1.1):[AC24V/PoE+] 0°C ~ 50°C (32°F ~ 122°F); Built-in fan
IPX4602HD(RE 1.1):[AC24V] -40°C ~ 50°C (-40°F ~ 122°F); [PoE+] 0°C ~ 50°C (32°F ~ 122°F); Built-in fan and heater |
Lowest Temperature for device’s start-up**** |
IPX4602HD(RE 1.1):[AC24V] -20°C (5°F); [PoE+] 0°C (32°F) |
Approvals |
IPX4202HD(RE 1.1): FCC, CE, KC
IPX4602HD(RE 1.1): FCC, CE, KC, IP66, IK10, IP67 |
Weight |
IPX4202HD(RE 1.1):2.1kg (4.64 lbs)
IPX4602HD(RE 1.1): 4.6kg (10.14 lbs) |
