| Model |
NGE2055F |
| ..[Camera]
|
Image Sensor |
1/3" Progerssive CMOS Sensor |
Scaning System |
16:9 Progressive |
Sync. System |
Internal |
Effective Pixels Number |
1920(H) x 1080(V) 2.0 Mega |
Horizontal Resolution |
1100 TV Lines |
Video Output Level |
Select NTSC/PAL 1.0Vp-p (BNC 75Ω, composite) |
Lens Mount
|
CS Mount |
Day & Night System
|
ICR (AGC Type) |
Min. Illumination
|
0.01Lux(Color, DSS On), 0.001Lux(B/W, DSS On)
|
OSD |
Control On/Off over IP (Menu, Time/Date)
|
Flickerless |
On/Off |
White Balance |
Auto/Manual/Push |
Exposure |
Auto/Manual |
WDR |
On/Off |
3D-DNR / 2D-DNR |
On/Off (20 Step) |
Privacy Zone |
Select 10 Zone – each area |
Function |
BLC, Color, B/W |
Elec. Shutter Speed |
NTSC : 1/30~1/30,000 (21 Step) | PAL : 1/25~1/30,000 (21 Step)
|
| ..[Video / Audio] |
Compression
|
H.264 / MJPEG |
Resolution
|
Full HD, SXGA, 720P, XGA, D1, VGA, CIF |
Audio |
Two-way (full duplex / ADPCM G.711) |
| ..[Network] |
Protocol
|
IPv4, HTTP, TCP, RTSP, RTP, RTCP, UDP, SMTP, FTP, ICMP,
DHCP, UPnP, Bonjour, ARP, DNS, DynDNS, NTP,
Multhcast HTTPS, QoS, SNMP *)
Onvif, IPv6 |
Supported DDNS
|
Supported (CNB DDNS) |
LAN Interface
|
Ehternet 10/100 Base-T (RJ-45 Type) |
| ..[Security] |
Access Level Setup
|
Multiple user access levels with password protection |
Network Security
|
IP Filtering |
| ..[Alarm and Event Managerment] |
Image Detection
|
Motion detection (Select 3 Regions - each area) |
Sensor Detection
|
Sensor In, Scheduling, Alarm out |
Local Storage
|
SD/SDHC Card Memory : Max. 32GByte (Class 4 or Higher) |
After Event Process
|
JPEG Image upload over FTP server
JPEG Image or Notification Message Upload over SMTP (E-mail server) |
Pre/Post alarm
|
Detail time-set : Max. Pre alarm 5sec.
Post alarm 8sec., Storage (SD card : JPEG Image, H.264 Movie file) |
| ..[Applications] |
Browser
|
Internet Explorer 6.0 or higher |
Support User Client
|
Concurrent users connections up to 10 Clients (by 64Kbps~1Mbps) |
Monitoring Application
|
XNET NVR 2, and Utility (IP-Installer) |
| ..[Maintenance] |
System Upgrade
|
Firmware upgrade over HTTP |
| ..[Mechanical] |
Standard PoE
|
Standard IEEE 802.3af supported |
Power
|
12VDC Max. 4W / 24VAC Max. 350mA |
Dimensions
|
71 (W) x 65 (H) x 143.9(D)mm |
Operating Temperature
|
-10℃ ~ 50℃ |
Weight(Net)
|
417.5g |
