Model | IGP1030 |
..[Camera] | |
Image Sensor |
1/2" Progerssive CMOS Sensor |
Scaning System |
4:3 Progressive |
Sync. System |
Internal |
Effective Pixels Number |
1280(H) x 960(V) 1.3 Mega |
Horizontal Resolution |
800 TV Lines |
Video Output Level |
Select NTSC/PAL 1.0Vp-p (BNC 75¥Ø, composite) * VGA/QVGA Mode Only |
Lens Mount |
CS Mount, DC Iris |
Min. Illumination |
1 Lux(DSS On) |
Flickerless |
On/Off |
White Balance |
Auto/Manual |
Exposure |
Auto/Manual |
Function |
BLC, Color, B/W |
Elec. Shutter Speed |
NTSC : 1/6 ~ 1/600 (8 Step) PAL : 1/6 ~ 1/500 (8 Step) |
..[Video / Audio] | |
Compression |
SXGA / XGA : MJPEG VGA : MJPEG / MPEG4 / H.264 |
Resolution |
SXGA , XGA, VGA, QVGA |
Audio |
Two-way (full duplex / ADPCM G.711) |
..[Network] | |
Protocol |
IPv4, HTTP, TCP, RTSP, RTP, RTCP, UDP, SMTP, FTP, ICMP, DHCP, UPnP, Bonjour, ARP, DNS, DynDNS |
Supported DDNS |
Supported (CNB DDNS) |
..[Security] | |
Access Level Setup |
Multiple user access levels with password protection |
Network Security |
IP Filtering |
..[Alarm and Event Managerment] | |
Image Detection |
Motion detection (Select 3 Regions - each area) |
Sensor Detection |
Sensor In, Scheduling, Alarm out |
After Event Process |
JPEG Image upload over FTP server / SMTP (E-mail server) |
Local Storage |
JPEG Image write to SD card memory SD memory : Support size Max 4GByte |
Pre/Post Alarm |
Detail time-set : Max Pre alarm 5 sec / Post alarm 8 sec Local storage (SD card memory : JPEG image) |
..[Applications] | |
Browser |
Internet Explorer 6.0 or higher |
Monitoring Application |
XNET NVR 2, and Utility (IP-Installer) |
..[Maintenance] | |
System Upgrade |
Firmware upgrade over HTTP |
..[Mechanical] | |
PoE |
Standard IEEE 802.3af supported |
Operating Temperature |
-10¡É ~ 40¡É |
Power |
DC 12V Max. 5 W |
Dimensions |
70(W) x 64(H) x 129(D)mm |